Tag Archives: make it yourself

Make a floral letter

Looking for something to decorate a nursery? A wedding gift? Something for your living room wall? How about making your own flower filled letter.

All you will need is:

  • Wooden/cardboard letter shape
  • Silk flowers
  • Glue gun
  • Scissors

I bought all of mine from hobbycraft. The fillable wooden letter was £3.50, you could also try their cardboard letter to decopatch or stick onto, or how about this copper wire letter and attach a few flowers to it using wire (you can buy wired flowers in the bridal section).

I bought the flowers from their floristry and also their bridal section. These weren’t cheap and from the floristry section I had to cut all the stalks off. I think you could probably get cheaper silk flowers, and more of a colour selection online. So maybe worth shopping around if you have time. Also some of the flowers were shorter and tucked away under the larger ones, so make sure to really get in there and check all the buckets!!

I used the hobbycraft mini glue gun which is only £5 and you can buy mini glue gun inserts too. Just plug it in, let it heat up for a few minutes and then simply pull and hold the trigger for the glue to come out. Be careful of fingers and hands, the glue is HOT when it comes out! Probably not one for kids to use unsupervised.

Before you start gluing, set out all your flowers to decide how you want it to look. The glue sets quickly, use a generous amount, and once you’ve finished it should already be set and ready to go! This took me only about 15 minutes to do, so a nice simple craft that would be great in your own home or as a gift for a child or a wedding. You can also get the & symbol, so you could do this for a couple with both of their initials.

There are plenty of other things you could also fill this with such as pom poms or maybe even succulent plants!! Let me know how you get on by sharing in the comments, or on instagram- tag me @josiemakes.

Happy crafting!

Advertisements

Leave a comment

Filed under Craft & DIY

Make It Yourself- Fabric Covered Noticeboard

Welcome! To the first of my new series of blog posts called #MIY- Make It Yourself!

Ideas on how to customise or up-cycle simple things into something a bit more special while at the same time looking after the pennies!

A couple of weeks ago I turned our garden summer house into a craft work shop. I did this without spending any extra money, just moving my craft things out there, and using old furniture from around my house. My first #MIY was featured in that post, and it is my fabric covered noticeboard. Amongst the things I found stored in my shed were a few unused noticeboards, but if you don’t have one lying around, these are pretty cheap to buy. I also have stashes of fabrics that I have never gotten round to using, this one I had bought with a dress pattern, but still have no idea how to make clothes! So I thought I would make use of it.

You will need:

  • Noticeboard
  • Fabric of your choice (the size of the board)
  • Fabric scissors
  • A screwdriver/ plastic knife/ plastic model making tool or anything else with a flat but blunt edge.
  • Drawing pins
  • Picture hanging kit and hammer

IMG_0189

Cut the fabric slightly larger than the size of the noticeboard, including the frame.  If your fabric has a pattern make sure you cut it straight so it won’t look wonky! Iron the fabric to take out any creases. Place the fabric on top of the board, the right way up, and use your flat screwdriver or plastic tool to start pushing the edges of the fabric under the frame. Make sure it is pulled tight.

IMG_0194

When you have done this the whole way round, place a drawing pin in each corner to hold it in place. If the fabric seems loose, or the frame isn’t holding it so well, you can create a border the whole way round with your drawing pins.

IMG_0197

Et voila! Simple!

IMG_0201

Hanging the board is easy as it is fairly light so doesn’t need much to hold it up. I just used a pin from a picture hanging kit, and hammered it lightly into the wall, and then balance the frame of the noticeboard on top in the middle, so that it is hanging straight. If the noticeboard is heavier or won’t hang straight, you can use two pins to hold it up at each corner.

IMG_0202IMG_0224

This is my finished board! There’s more on it now, nothing in my life stays this tidy for long!!

I hope you enjoyed this first edition of #MIY Make It Yourself, and enjoy customising your own notice board. If you do make this yourself, let me know by instagramming or blogging and tagging it with #MIY and #josiemakes!

Happy making,

Josie xxx

3 Comments

Filed under Craft & DIY